How thick is glass in glass reactor?

Glass reactor is a widely used equipment in laboratory and industrial production,mainly used to carry out chemical reaction,synthesis,extraction and other operations.The choice of glass reactor is critical to the accuracy and safety of experimental results,and the thickness of the glass is an important consideration when choosing a glass reactor.



Glass thickness in glass reactors will vary depending on the design,manufacturer and intended use of the reactor.In general,glass reactors used in laboratories usually have wall thicknesses of a few millimeters to several tens of millimeters,e.g.,a 10-liter glass reactor may have a wall thickness of around 10-20 millimeters.Industrial-grade glass reactors,on the other hand,may have a greater wall thickness of 20 mm or more,as they are required to withstand higher pressures and temperatures.

However,according to national standards,a glass thickness of 6mm is considered ideal.This thickness ensures adequate pressure and impact resistance,but it is also relatively easy to ensure that the cooling rate and shrinkage ratio of the inner and outer glass layers are consistent during the manufacturing process,thus avoiding stress problems caused by inconsistent coefficients of thermal expansion.

The glass material of glass reactor is also an important factor affecting its performance.Some glass reactors are designed with double glass,and the middle jacket can be passed into hot or cold solvent to realize high or low temperature reaction.This design puts higher requirements on the heat and cold resistance of the glass.

It should be noted that although glass thickness affects the performance of the reactor to a certain extent,it is not the thicker the better.Excessively thick glass may lead to a decrease in heat transfer capacity and affect the reaction effect.Therefore,when choosing a glass reactor,a number of factors such as its thickness,material,manufacturing process and so on should be considered comprehensively to ensure that it can meet the needs of experiment or production.

Overall,the glass thickness of glass reactor is a parameter that needs to be carefully considered and weighed,and it needs to be determined according to specific application scenarios and needs.For more information about glass reactor,it is recommended to check relevant literature or consult with professional manufacturers.